Description
x14 Inch Twin Wood Platform Bed Frame with 12 Plywood Slats and Adjustable Foot Pads, Espresso
Five middle support legs sit on adjustable foot pads, so the frame can be levelled on an old floor instead of rocking on it. The Twin frame measures 76.5 by 41 inches, stands 14 inches tall and is rated at 440 lb.
Twin size440 lb capacityAdjustable foot pads10.5 in clearance12 plywood slats
A bed that knocks on an uneven floor
Old floors are never flat
In an older house or a basement suite, one leg always lands lower than the rest. The frame rocks, and every time someone turns over the corner taps the floor.
Pads you can screw level
Five middle support legs run down the centre of this frame and each sits on an adjustable foot pad. You wind the low one down until the rocking stops, rather than shimming a leg with folded card.
Dark espresso rails and legs, pale slats, and a row of levelling pads down the middle that most frames at this price leave out.
The frame is bigger than the mattress
76.5 by 41 inches on the floor, 14 inches tall, with 10.5 inches of clear space below. A Twin mattress is 38 by 75 inches, so the frame runs wider and longer than the mattress it carries. Measure for the 76.5 by 41.
Levelling an old floor
Five legs run down the centre of the deck, and the pads under them screw up and down. On a settled hardwood floor or a basement slab that is never quite flat, those pads are what stop one corner rocking every time you turn over.
Twelve slats, and the gap between them
The panel measures the space between slats at 4.5 inches. Foam and hybrid mattress makers commonly ask for three inches or less, so check your mattress warranty before pairing this deck with foam. An innerspring mattress is the easier match here.
What the 10.5 inches is for
Storage boxes, shoes and a robot vacuum, in the manufacturer's own words. The clearance is the same all the way round because there is no footboard and no side skirt to reach past.
What the record publishes
440 lb capacity
The manufacturer's published figure for the Twin.
5 middle support legs
Down the centre of the slat deck.
Adjustable foot pads
Screw pads to level the frame on an uneven floor.
12 plywood slats
Set at a published 4.5 inch gap.
Rubber wood legs
Solid rubberwood legs with reinforced connections.
10.5 in clearance
Published under-bed height.
Specifications
| Mattress size taken | Twin (mattress not included) |
|---|---|
| Frame outer size | 76.5 in x 41 in x 14 in |
| Under-bed clearance | 10.5 in |
| Box spring | Not required |
| Slats | 12 plywood slats, included |
| Slat spacing | 4.5 in gap (manufacturer panel) |
| Weight capacity | 440 lb |
| Middle support legs | 5, with adjustable foot pads |
| Leg material | Solid rubberwood |
| Colour | Espresso |
| Headboard | None |
Size and fit at a glance
How it compares
Where levelling pads and a centre leg row change things. General category guidance.
| This frame | A four leg platform | A frame plus box spring | |
|---|---|---|---|
| Centre support | 5 middle legs | None | Box spring |
| Levelling | Adjustable foot pads | Fixed feet | Fixed feet |
| Published slat gap | 4.5 in | Varies | Not applicable |
| Published capacity | 440 lb | Varies | Varies |
Shipping
Ships from our United States warehouse. Delivery to Canada usually takes 8 to 14 business days, with no customs charges or duties to pay on arrival. Free shipping on orders over $150, a flat $18.90 below that, and tracking by email as soon as it leaves.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Price match
Found it cheaper at a Canadian retailer? Send us the link and we will match that price. It has to be the same item, in stock, sold and shipped inside Canada, and compared like for like on what comes in the box.
Who is this perfect for?
Old floors and basement suites
Adjustable pads take up the difference so the frame sits still instead of knocking on a settled floor.
Innerspring mattress owners
The 4.5 inch slat gap suits a sprung mattress. For foam, check what gap your warranty allows first.
What we stand behind
- The 76.5 by 41 by 14 inch frame size, the 10.5 inch clearance, the 440 lb capacity, the twelve slats and the 4.5 inch slat gap are the manufacturer's published figures.
- The 4.5 inch gap is wider than the three inches most foam and hybrid mattress makers ask for. We publish the figure so you can check it against your own mattress warranty.
- The written description is shared across Twin, Full and Queen versions of this frame. Only the Twin figures are published here.
- No suitable mattress size in inches is published for this variant, so the Twin dimensions are the standard Canadian ones.
- The mattress is not included.
Frequently asked questions
What mattress size does it take?
A Twin. A Canadian Twin mattress is 38 by 75 inches. Not included.
How big is the frame?
76.5 inches long by 41 inches wide, standing 14 inches tall.
How far apart are the slats?
4.5 inches between slats, as measured on the manufacturer's panel.
Will a foam mattress be supported?
The gap is wider than the three inches foam makers usually ask for. Check your mattress warranty, and add a bunkie board if it calls for one.
What weight does it hold?
440 lb, as published.
Can it be levelled on an uneven floor?
Yes. The five middle support legs sit on adjustable foot pads.
Shipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to anywhere in Canada & United States of America . Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Le choix d'une sélection entraîne l'actualisation de la page entière.