Description
x14 Inch Full Size Rubberwood Platform Bed Frame, 14 Slats at a 2.6 Inch Gap, Coffee
Fourteen slats set 2.6 inches apart, which is inside the three inch gap most foam mattress makers ask for. The coffee stained rubberwood frame measures 74.5 by 53.5 by 14 inches and carries a standard 54 by 75 inch Double mattress, rated to 500 lb.
2.6 in gap between slatsFits a 54 x 75 in Double500 lb capacity14 in tall, no headboardSolid rubberwood
A foam mattress and a slatted deck
Where foam mattresses sag
Foam has no internal springs to bridge a gap. On a deck with wide slats it settles into every space between the boards. Most foam mattress warranties are written to say so.
A published gap you can check
This frame publishes its slat gap at 2.6 inches across fourteen slats. That sits under the three inch figure foam and hybrid makers commonly quote, so the mattress is carried rather than bridged.
Darker than the natural version and warmer than a black metal frame. Ten legs, fourteen pale slats, no headboard.
The gap that decides your mattress
The panel puts a figure on the slat gap: 2.6 inches. Foam and hybrid mattress makers commonly ask for no more than three inches, so a foam mattress sits on this deck without dropping between the boards. Innerspring mattresses tolerate wider gaps and are fine here too.
What has to fit the room
74.5 inches long, 53.5 inches wide, 14 inches tall. The mattress it takes is a 54 by 75 inch Double. Published capacity for the whole frame is 500 lb.
Two ways it holds the mattress
Adhesive strips and hook and loop fasteners both appear on the slats. Both are there for the same reason: a mattress on a bare slatted deck will otherwise creep toward the foot of the bed. The manufacturer also states the assembled frame is noise free.
Low and out of the way
There is no headboard and no footboard, so the bed stops at the mattress line. In a room where the bed has to go under a window or beside a desk, that is the difference between fitting and not fitting.
What the record publishes
14 slats at a 2.6 in gap
The gap is measured on the manufacturer's own panel.
Solid rubberwood
Rubberwood rails and legs, poplar slats.
500 lb capacity
Published for the assembled frame.
Ten support legs
Six around the edge, four down the centre.
No box spring
The slats are the mattress support.
10.5 in clearance
Floor to slat, as the written record states.
Specifications
| Mattress size taken | Full / Double, 54 in x 75 in (not included) |
|---|---|
| Frame outer size | 74.5 in x 53.5 in x 14 in |
| Slats | 14, included |
| Slat spacing | 2.6 in gap (manufacturer panel) |
| Box spring | Not required |
| Under-bed clearance | 10.5 in |
| Weight capacity | 500 lb |
| Legs | 10 |
| Frame material | Rubberwood with poplar slats |
| Product weight | 61.5 lb |
| Colour | Coffee |
| Headboard | None |
Size and fit at a glance
How it compares
Where a 2.6 inch slat gap matters. General category guidance, not testing.
| This frame | A wide-slat frame | A box spring set | |
|---|---|---|---|
| Published slat gap | 2.6 in | Often 4 in or more | Not applicable |
| Foam mattress support | Within the usual 3 in rule | May sag between slats | Supported |
| Extra parts to buy | None | Bunkie board sometimes | Box spring |
| Height added | 14 in | Varies | Varies |
Shipping
Ships from our United States warehouse. Delivery to Canada usually takes 8 to 14 business days, with no customs charges or duties to pay on arrival. Free shipping on orders over $150, a flat $18.90 below that, and tracking by email as soon as it leaves.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Price match
Found it cheaper at a Canadian retailer? Send us the link and we will match that price. It has to be the same item, in stock, sold and shipped inside Canada, and compared like for like on what comes in the box.
Who is this perfect for?
Foam and hybrid mattress owners
The 2.6 inch gap is inside the three inch limit most foam warranties set, so no bunkie board is needed.
Anyone tired of a creaking frame
The manufacturer states the assembled frame is noise free, with fasteners holding the mattress still.
What we stand behind
- The 2.6 inch slat gap, the 74.5 by 53.5 by 14 inch frame size, the 500 lb capacity and the 61.5 lb product weight are the manufacturer's published figures.
- The three inch guidance for foam mattresses is general industry advice, not a claim about your mattress. Check your own mattress warranty.
- The mattress is not included.
- The record lists the colour as Brown/Natural while the title says Coffee. We describe the finish as coffee, matching the photography.
- No certification or test standard is published for this frame, so we claim none.
Frequently asked questions
How far apart are the slats?
2.6 inches, as measured on the manufacturer's own panel. That is inside the three inch gap most foam mattress makers ask for.
What size mattress does it take?
A Full, sold as a Double in Canada, 54 by 75 inches. Not included.
How much floor does the frame need?
74.5 inches by 53.5 inches, standing 14 inches tall.
Do I need a box spring?
No. The slats support the mattress directly.
What will it hold?
A published 500 lb for the assembled frame.
Will a foam mattress sag on it?
The published gap of 2.6 inches is narrower than the three inch limit foam makers usually set. Confirm the figure your own mattress warranty asks for.
Shipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to anywhere in Canada & United States of America . Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Le choix d'une sélection entraîne l'actualisation de la page entière.